This is what I did I have LG esteem
1. Make sure USB debugging is enabled
2. Download USB driver http://www.mediafire.com/?f2p9kneghvatdao and install on your computer
3. Download 3020 prl or New Prl 3022 Credit goes to LockLady OR even newer PRL 3023 latest prl 3024
4. Download and install qpst 2.7
qpst 2.7 the first qpst download did not work for me but this one did but popped up as trojan but it workshttp://www.mediafire.com/?gh98iae3vrc49yg
5. Connect phone to computer and enable internet connection on phone.
6. Open device manager expand ports and make note of what com port your USB device is on
7. Open up qpst configuration if com port is not shown select add port and enter com# (# being the one seen @ device manager)
8. Select service programming (phone must be selected to continue)
after phone selection choose this FFA3100-1900 hit ok
9. On the main menu setting tab click read from phone and will obtain phone info it will ask for ur spc
10. Spc code can be obtained through cdma workshop or by using checkesnfree.com or at http://www.whiterabbit.org/android/ Get Spc
11. Look for roam tab and there will be an option under preferred roaming to search for new prl locate it and select write it will ask for ur spc code again
note I'm not responsible for bricking ur phone I've done this before and familiar with the software even though this quick tut should be noob friendly
originally posted by santia213 works on are phone to
UPDATE optimus M prl Using QPST
1. Make sure USB debugging is enabled
2. Download USB driver http://www.mediafire.com/?f2p9kneghvatdao and install on your computer
3. Download 3020 prl or New Prl 3022 Credit goes to LockLady OR even newer PRL 3023 latest prl 3024
4. Download and install qpst 2.7
qpst 2.7 the first qpst download did not work for me but this one did but popped up as trojan but it workshttp://www.mediafire.com/?gh98iae3vrc49yg
5. Connect phone to computer and enable internet connection on phone.
6. Open device manager expand ports and make note of what com port your USB device is on
7. Open up qpst configuration if com port is not shown select add port and enter com# (# being the one seen @ device manager)
8. Select service programming (phone must be selected to continue)
after phone selection choose this FFA3100-1900 hit ok
9. On the main menu setting tab click read from phone and will obtain phone info it will ask for ur spc
10. Spc code can be obtained through cdma workshop or by using checkesnfree.com or at http://www.whiterabbit.org/android/ Get Spc
11. Look for roam tab and there will be an option under preferred roaming to search for new prl locate it and select write it will ask for ur spc code again
note I'm not responsible for bricking ur phone I've done this before and familiar with the software even though this quick tut should be noob friendly
originally posted by santia213 works on are phone to
UPDATE optimus M prl Using QPST
0 件のコメント:
コメントを投稿